Course description
Manual Handling Training - Online Course
This Manual Handling online course provides learners with the knowledge they need to reduce the chances of injury whilst manually handling loads in a work environment. The course outlines the 5 key principles of manual handling.
Injury to employees while handling, lifting or carrying something is one of the most common types of accident in the workplace every year. The majority of manual handling injuries last for at least three days. Many incidents cause damage to the back.
Employers must comply with the Manual Handling Operations Regulations 1992, as amended by the Health and Safety (Miscellaneous Amendments) Regulations 2002. Employers are required by law to take reasonable steps to safeguard the health and safety of all employees. This includes raising awareness about the hazards related to manual handling and outlining what can be done to minimise risk.
i2Comply’s essential Manual Handling online course will make your workplace a safer and less injury-prone environment. Below, we have provided detailed information about the course to answer any potential questions you may have.
Upcoming start dates
Suitability - Who should attend?
Who needs manual handling training?
All employers need to comply with the risk assessment requirements set out in the Management of Health and Safety at Work Regulations 1999 and they need to carry out a risk assessment on manual handling tasks as specified in the Manual Handling Operations Regulations 1992.
Most employees who take our manual handling online training course work in environments where there is regular lifting. This includes retail, factory, and on-site workers, to name a few.
Outcome / Qualification etc.
What are the learning outcomes for the Manual Handling course?
After completion of the manual handling online course, you will be able to explain the following:
- What is meant by the term manual handling.
- Health and safety regulations aimed at reducing musculoskeletal injuries in the workplace.
- How the musculoskeletal system functions
- Common musculoskeletal injuries.
- The prevalence and potential severity of handling, lifting and carrying injuries.
- The principles of relative weight increase.
- Potential risks during lifting and carrying tasks.
- Common causes of handling, lifting and carrying injuries.
- Measures for controlling manual handling risks.
- The preparation required before lifting and moving a load.
- Good and bad practice when pushing or pulling a load.
- The hazards of lifting in a restricted space.
- What is meant by psychosocial risk factors.
Training Course Content
What is Manual Handling
The first topic is an introduction to manual handling. The topic identifies common manual handling activities and injuries. You will learn about the frequency and causes of manual handling injuries. The topic also outlines legislation that aims to reduce manual handling injuries in the workplace.
The Musculoskeletal System
The second topic is about the spine, how it works and what can go wrong. You will learn about the parts of the spine and how discs absorb shock. The topic also explains the action of the facet joint and how injury can occur. It also covers the causes of musculoskeletal disorders and how to avoid them. The topic also explains what to do if you suffer a manual handling injury.
Controlling the Risks
The third topic explains how to control the risk of manual handling injury. The topic also covers the most common cause of trips and falls and how to avoid them.
Relative Weight Increase
Topic 4 outlines the factors that determine whether you can lift a load safely. You will also learn about relative weight increase and how risk changes depending on how you carry a load.
Preparing for the Lift
Topic 5 is about preparation. You’ll learn how to assess the risks, check routes, and consider travel distance and height. The topic also explains when to use PPE and mechanical aids, and when to get help from another person.
Lifting Technique
Topic 6 is about how to lift, carry and place a load safely. You will also learn more about common causes of manual handling injuries.
Pushing and Pulling
Topic 7 is about pushing and pulling. It covers accidents caused by pulling and pushing, and how to push a load safely. You will also learn about what happens if you overload a trolley and what to do if equipment is faulty.
Handling in Restricted Spaces
Topic 8 explains risk due to restricted movement and working when seated.
Psychosocial or Non-Physical Risk Factors
The final topic is about psychological risk factors. Finally, you will learn about how these factors increase risk and also how to reduce that risk.
Why choose i2Comply
Over 120,000 training course completions
93% of reviewers recommend i2Comply training courses
All Health & Safety training courses assured by RoSPA Qualifications.
Reviews
Average rating 4.7
Excellent course and very helpful
Very useful & informative advice
Expenses
Price: £15.00 ex. vat
was a good review of manual handling